Small Appliance

How to Increase Pool Vacuum Suction?

Keeping your pool clean and hygienic is not just a matter of aesthetics; it's essential to ensure a safe and pleasurable swimming environment. A pool vacuum is what makes this possible! However, if your pool vacuum suction is operating at a subpar level, you may not be able to take out all the dirt. 

It makes your pool look unpleasant, while inside water raises health concerns. But worry no more; increasing the suction of your pool vacuum can resolve the issue. How to increase pool vacuum suction? In this guide, we are going to answer this question in detail.

how to increase pool vacuum suctionhow to increase pool vacuum suction

Part 1. Why Is My Pool Vacuum Not Getting Good Suction?

Several factors can contribute to poor pool vacuum suction. Understanding these factors helps you in knowing how to increase pool vacuum suction. Some of these include:

  • Issues with the Pool Pump: Problems such as a damaged impeller or air leaks in the pump can disrupt the vacuum's ability to create suction.
  • Congested Skimmer Basket: Debris buildup in the skimmer basket can obstruct water circulation, affecting the vacuum's performance.
  • Clog at the Intake Hole of the Pool Cleaner: Large debris or objects can block the intake hole on the pool cleaner, diminishing its capacity to collect dirt and debris. 
  • Leaks in the Vacuum Hose or Connections: Leaks can occur due to wear and tear, reducing the vacuum's efficiency over time.
  • Dirty or Clogged Filter: Accumulated debris in the filter can limit water flow, impacting the vacuum's suction power. Regular maintenance is essential to prevent clogs.
dirty pool filterdirty pool filter

Part 2. How to Increase Pool Vacuum Suction?

Check and Address the Blocked or Cracked Pool Hose

Many times, a blocked or cracked pool hose can significantly hinder your pool vacuum's suction power. Therefore, it's essential for you to identify and address this issue. Here are the steps for that:

pool hosepool hose
  1. Turn off the pool pump before inspecting the hose.
  2. Examine the entire hose for blockages, such as leaves or debris.
  3. If blockages are found, disconnect the hose from the vacuum head and the skimmer or dedicated vacuum line.
  4. Use a garden hose or pressurized water source to flush water through the hose to dislodge and remove debris.
  5. If the hose is flexible and has cracks, consider using a hose repair kit per the manufacturer's instructions.
  6. For rigid PVC hoses with cracks, it's often best to replace the damaged section or the entire hose.
  7. Reattach the hose to the vacuum head and the skimmer or dedicated vacuum line.
  8. Turn on the pool pump and observe the vacuum's performance to ensure improved suction.

Clean Your Pool Filter

A pool filter is a crucial component of your pool's circulation system and is responsible for keeping the water clean and clear. Its primary function is to trap and remove debris, dirt, leaves, and other contaminants from the pool water. However, if the pool filter becomes dirty or filled with rodents and leaves, it may affect the suction power of your vacuum. Here's how to increase pool vacuum suction by cleaning your filters:

clean pool filterclean pool filter
  1. First, ensure the pool pump is switched off to avoid any accidents during the cleaning process.
  2. Depending on your pool's filtration system, locate and access the filter. This may involve removing a filter lid or opening a filter compartment.
  3. Take out the filter elements, which could be cartridges or diatomaceous earth (DE) grids, depending on your filter type.
  4. If you have a cartridge filter, rinse the cartridges with a hose to remove debris. If you have a sand or DE filter, follow the manufacturer's instructions for backwashing to clean the filter media.
  5. While cleaning, inspect the filter elements for any damage or signs of wear. Replace them if necessary.
  6. Once cleaned and inspected, reassemble the filter elements and ensure they are correctly seated.
  7. Restart the pool pump to resume normal filtration operations.
  8. Keep an eye on the pool water over the next few hours to ensure that water clarity improves as the filter does its job.

Remove Skimmer Basket Blockage 

Removing skimmer basket blockage is another method that helps answer your how to increase pool vacuum suction question. The skimmer basket captures leaves, debris, and other contaminants before they sink to the pool's bottom. However, this basket can become clogged over time, impeding water flow and affecting vacuum suction. Here are the steps to remove the skimmer basket blockage: 

remove the skimmer basket blockageremove the skimmer basket blockage
  1. Ensure the pool pump is switched off to avoid accidents during cleaning.
  2. Locate and access the skimmer basket. This typically involves removing the skimmer lid or cover.
  3. Carefully lift the skimmer basket out of its housing, wearing a pair of gloves to protect your hands from debris and dirt.
  4. Empty the contents of the skimmer basket, removing all leaves, debris, and other materials that may have accumulated. Dispose of this waste properly.
  5. Rinse the skimmer basket thoroughly with a hose to ensure it is clean and free from any remaining debris.
  6. Establish a routine cleaning schedule for the skimmer basket to prevent future blockages. Regular maintenance helps maintain optimal water circulation and filtration.
  7. For added prevention, consider using a pool skimmer sock. This fine mesh sock fits over the skimmer basket and captures smaller debris, reducing the frequency of blockages.

Replace the Pool Pump O-Ring

The pool pump plays a crucial role in the vacuum suction process, as it creates the necessary flow to move water and debris through the cleaning system. When there's an issue with the pool pump O-ring, it compromises this critical function. To address this problem, replace the faulty O-ring with a new one. Here are the steps for that: 

replace the pool pump O-ringreplace the pool pump O-ring
  1. Turn off the power to your pool pump.
  2. Slowly open the pressure relief valve on the filter canister until water dribbles out and the pressure gauge drops to zero.
  3. Unlock and lift off the filter head from the filter body.
  4. Remove the O-ring from the groove in the filter head collar.
  5. Clean the O-ring groove with a wet cloth.
  6. Install the replacement O-ring, coating it with silicone-based grease for sealing.
  7. Ensure the O-ring is correctly seated in the groove and the filter head is positioned with the gauge facing outward.
  8. Lock the filter head to the filter body by rotating the locking knob.
  9. Restore power to your pump from the circuit breaker.
  10. Observe the pressure relief valve until water sprays out, then close it by turning it clockwise.

Clean the Clogged Pool Pump Impeller 

The pool pump impeller is the pump's most important and only moving part. Dirt and debris accumulation doesn't allow water to flow smoothly through the cleaning filters, reducing vacuum suction. So, the best thing you can do regarding how to increase pool vacuum suction is to clean the clogged impeller. The steps for this are: 

clean clogged pool pump impellerclean clogged pool pump impeller
  1. Switch off the pump at first.
  2. Open the pump lid and remove the strainer basket.
  3. Use a screwdriver to reach the pump housing and locate the impeller hole.
  4. Scrape and move the screwdriver in and out to extract debris, and you are all done!

Bonus: Switch to a Powerful Pool Vacuum with Enough Suction

Now that you know the issues that may arise with a traditional pool vacuum and how to increase pool vacuum suction, you must be looking for a reliable vacuum option with powerful suction. 

The AiDot Enhulk Cordless Pool Vacuum is a powerhouse in debris cleaning with its robust 40Wh motor and 20V battery, delivering impressive suction power at 4200L/h. Ideal for spas, hot tubs, small inground, and above-ground pools, it ensures thorough cleaning.

The vacuum's 9.25" triangled brush effortlessly captures dirt, while the crevice nozzle targets tricky spots. Two reusable filter bags handle various debris types. With a single button to start, it easily attaches to standard telescoping poles or can be hand-operated, providing a hassle-free, powerful cleaning experience.

copy Extra 10% off Code: AiDotBG01
AiDot ENHULK Cordless Pool Vacuum with Telescopic Pole for Deep Cleaning-Pool Vacuum
$104.99
$169.99
$65
copy Extra 10% off Code: AiDotBG01

Enhulk Handheld Pool Vacuum: Powerful suction (up to 15.8 GPM), versatile cleaning with two brush heads, and cord-free operation.Effortless pool maintenance, anytime, anywhere

  • Powerful Suction: Enhulk handheld pool vacuum comes with a strong motor for powerful suction. The max flow rate is up to 15.8 gallons/min. It is designed for quick & efficient debris pick-up: acorns, twigs, leaves, dirt, and sand(Not for algae)
  • Versatile Cleaning:Enhulk cordless pool vacuum has 2 different brush heads: triangular suction head and nose cone head. It takes you no effort to clean the stairs, corners, or hard-to-get areas. Ideal for in-ground pools, above-ground pools, SPA, and hot tub
  • With Telescopic Pole: Two kinds of cleaning methods: hand-held type and telescopic pole type help you clean the hardest-to-reach areas. The telescopic pole can extend from 3 to 7.3ft. Enjoy your pool cleaning, and get rid of the annoying cord or hose
  • Easy Operation: Simply attach the pool vacuum to the appropriate handle, turn the pool vacuum on, submerge the water outlet of the unit and you are ready to vacuum as you do on the floor. The filter screen can be removed for cleaning. Tool-free assembly, easy and convenient
  • More Run Time:Enhulk pool vacuum is equipped with 5 × 2000mAh rechargeable lithium battery that provides up to 60 minutes of run time, allowing you to clean your pool without any interruptions. Featuring quick charge technology, it fully recharges in just 1.5 hours
  • 4 REUSABLE FILTER BAGS: Cordless pool vacuum is equipped with 2 types of filter bags (2pcs180Mesh and 2*500Mesh); You can choose the appropriate filter net for the pore size to clean different debris, small leaves and twigs are suitable for 180M, sand and bugs are suitable for 300M. (ATTENTION: Not for algae! Otherwise, itwill clog )
  • WHAT'S INCLUDED:1 x Enhulk Pool Vacuum,1 x Short handle,1 x Telescopic Pole, 4 x Filter nets(2pcs180M,2pcs500M),1 x Charger, 12-month warranty. If you have any problem, please do not hesitate to contact our Service Team, we are here to provide assistance within 24 hours
  • STORAGE: During long-term storage, you need to charge this machine every two months, otherwise the battery will be easily damaged.

Conclusion

The importance of pool vacuum suction cannot be overstated. It plays a crucial role in efficient cleaning and removing debris, leaves, dirt, and other contaminants from the pool water. Without sufficient suction, the vacuum's ability to maintain water clarity, hygiene, and overall pool aesthetics is compromised. If your pool vacuum suction is low and you are worried about how to increase pool vacuum suction, you can follow the methods mentioned above. 

And if you are looking for a vacuum with powerful suction to avoid any issues, the AiDot Enhulk Cordless Pool Vacuum with Telescopic Pole is the best. With its robust and long-lasting motor and impressive suction, it makes cleaning the pool a hassle-free task. Besides, AiDot has recently introduced a variety of new products. You can explore the review on the latest security floodlight camera to get better insights.

← Previous Next →
Comment(s)
spring deal